Buy Factory Direct Spa Covers

Select insulation upgrade

	UPGRADE OPTIONS Deluxe foam 1.5 lb, 5 years warranty : $0.00 Super Deluxe foam 2.0 lb, 7 years warranty : (Out of Stock)

Please Select Your Upgrade Option*

*Additional Charges

Proceed Back

Select dimensions

BRAND


Spa Brand
Spa Model
Spa Year

DIMENSIONS

The Fold (center hinge) always cuts the "A" dimension in half. Please double-check your measurements and fold orientation. If you are unsure, please contact us before ordering. Enter your cover dimensions using decimal format (e.g. 84.25).


Dimension A (Inches)*
Dimension B (Inches)
Dimension C (Inches)
Dimension D (Inches)
Dimension E (Inches)
Dimension F (Inches)
Hint These measurements are to be used as guidelines only. Please crosscheck these given measurements with your Hot Tub to make sure that you provide us with correct measurements to promptly produce your cover for you. We will not be held responsible if you provide us with incorrect measurements.

When providing us with dimensions for sides A and B, make sure that measurements are to the outside of your Hot Tubs acrylic top. We always cut dimension "A" in half, please double check the measurements you have input before proceeding to the next step. If your cover has the same length and width (square). The fold direction does not affect the way the cover looks.

Due to various strap placement orientation, we can not guarantee your existing straps will line up perfectly with ours. We will provide you with all new hardware to attach your new safety straps.

*Maximum measurement : 96 inches

Proceed Back

Select skirt length




Your skirt length is the flap of material that hangs from the bottom of your cover to hide the acrylic portion of your Hot Tub. This measurement is to your preference; generally you want the skirt to cover your acrylic top.

Select Skirt Length (Inches)

FREE SKIRT UP TO 4"

Proceed Back

Select tie down

The standard position for our tie downs are 16" from the sides of the cover. If you would like tie downs in a specific location to match existing tie down that you may have, please specify below. NOTE any size over 96" is subject to extra charges & may require extra tie downs, please phone in if this is the case. FREE TIE DOWNS

Tie Down

Location

Option

Proceed Back

Select color

COLOR

Select your color *

Click on swatches to view larger swatch sample


Black	Blue	Brown	Burgundy	Charcoal


Chestnut	Chocolate	Forest Green	Dark Grey	Tan


Teal Green	Tropical Blue

*The color swatches displayed are spa industry standard, but due to variations in computer monitors it is not possible to guarantee an exact color match.

Proceed Back

Select fold direction *


	When providing us with dimensions for sides A and B, make sure that measurements are to the outside of you Hot Tubs acrylic top. We always cut dimension "A" in half, please double check the measurements you have input before proceeding to the next step. If your cover has the same length and width (square). The fold direction does not affect the way the cover looks.

Fold Direction

	Cut "A" in half for fold

	Cut "B" in half for fold

Proceed Back

Additional cover upgrade

These are upgrades we offer that will greatly increase the efficiency of your new Hot Tub cover.

Upgrade Option 1: Select pillow Type (Hinge Seal) A full pillow upgrade gives a complete seal along the hinge providing better heat retention, compared to the standard which gives you two pillows at the end of your hinge to prevent heat from escaping through the sides.

Upgrade Option 2: Double wrap (Water Absortion Protection) The double wrap upgrade is an extra thick layer of plastic that we vacuum seal around the foam insulation. This compared to the standard wrap gives additional protection from any rough handling and regular wear and tear over time.


Upgrade Option 1: Select Pillow Type (Hinge Seal)

Upgrade Option 2: Double Wrap (Water Absortion Protection)

Proceed Back

Additional comments


When providing us with dimensions for sides A and B, make sure that measurements are to the outside of you Hot Tubs acrylic top. Your skirt length is the flap of material that hangs from the bottom of your cover to hide the acrylic portion of your Hot Tub. This measurement is to your preference; generally you want the skirt to cover your acrylic top. The standard position for our tie downs are 16" from the sides or the cover. If you would like tie downs in a specific location to match existing tie down that you may have, please specify below.
When providing us with dimensions for sides A and B, make sure that measurements are to the outside of you Hot Tubs acrylic top. We always cut dimension "A" in half, please double check the measurements you have input before proceeding to the next step. If your cover has the same length and width (square). The fold direction does not affect the way the cover looks.
I have verified the dimensions and fold direction of my cover and confirm them to be correct

Additional comments if any

ADD TO CART Back

Video

Testimonials

Safety Standard

Economy Spa Cover

Cover Type

Brand or Shape

Insulation Upgrade

Dimensions

Skirt Length

Tie Down

Color

Fold Direction

Additional Cover Upgrade

Select insulation upgrade

UPGRADE OPTIONS

Deluxe foam

Super Deluxe foam

Select dimensions

BRAND

DIMENSIONS

Select skirt length

Select tie down

Select color

COLOR

Select fold direction *

Additional cover upgrade

Additional comments

Write a review